描述
PC注塑成型
特点：无卤阻燃，高流动性，高耐热性
用途：显示屏前框、后壳、笔记本电脑壳、电子电器等。
PC塑料材料注射
产品细节
PC塑料材料注射
在PC塑料的高剪切速率下，熔体的粘度会随着剪切速率的增加而降低，但下降幅度远小于传统塑料。在低剪切速率下，熔体的粘度很小。因此，通过在低剪切速率下调节温度和剪切速率，可以改善流动状态，并且效果更有效。这很清楚
PC塑料的吸水能力较低，一般含水量应控制在一定范围内，因为在加热条件下易水解，这会影响PC塑料的使用寿命，也会降低压力和冲击强度。因此，在成型过程中应严格控制PC塑料的水分含量
是一家专业的pc塑料注塑制造商，您可以从我们工厂以优惠的价格订购高品质的pc塑料注塑件 Features: halogen-free flame retardant, PC Plastic Material Injection
high fluidity, high heat resistance.
Application: display front frame and back shell,
notebook shell, electronic appliances, etc.
PC Plastic Material Injection
Product Details
PC plastic material injection
Under the high shear rate of PC plastics, the viscosity of the melt will decrease with the increase of the shear rate, but the decline is much smaller than that of traditional plastics. At low shear rates, the viscosity of the melt is small. Therefore, by adjusting the temperature and the shear rate at a low shear rate, the flow state can be improved and the effect is more effective. It is clear.
The water absorption capacity of PC plastics is low, and the general water content should be controlled within a certain range, because it is easy to hydrolyze under heating conditions, which affects the service life of PC plastics, and also reduces the pressure and impact strength. Therefore, the moisture content of PC plastic should be strictly controlled during the molding process.
ContactnowformoredetailsaboutPC plastic material injection.
Kitty Liu< ###>
is one of the professional pc plastic material injection manufacturers, you can order high quality pc plastic material injection at good price from our factory.
评价
目前还没有评价