描述
ABS塑料颗粒
建筑装饰业
交通运输业、广告业
电气、化工机械、汽车业
ABS塑料颗粒
产品详细信息
ABS塑料颗粒。ABS塑料具有高吸湿性和湿敏性。成型前必须充分干燥和预热（在80~90℃下至少2小时），含水量控制在0.03%以下
2。ABS树脂的熔体粘度对温度不太敏感（与其他非晶态树脂不同）。虽然ABS的温度略高于PS，但它不能像PS那样有一个宽松的加热范围，也不能盲目地用来增加其粘度。可以通过提高螺杆转速或最大压力来提高其流动性。一般加工温度为190-235℃
现在联系我们
刘凯蒂是专业的abs塑料颗粒制造商之一，您可以从我们工厂以优惠的价格订购高品质的abs塑料颗粒
ABS Plastic Pellets
Architecture Decoration Industry
Transportation Industry, Advertisement Industry
Electric & Electrical, Chemical Machinery,
Automobile Industry
ABS Plastic Pellets
Product Details
ABS plastic pellets
1. ABS plastic has high hygroscopicity and moisture sensitivity. It must be fully dried and preheated (at least 2 hours at 80~90C) before molding, and the moisture content is controlled below 0.03%.
2. The melt viscosity of ABS resin is less sensitive to temperature (different from other amorphous resins). Although the temperature of ABS is slightly higher than that of PS, it cannot have a loose heating range like PS, and cannot be used blindly to increase its viscosity. It can be increased by increasing screw speed or maximum pressure to improve its fluidity. The general processing temperature is 190-235℃.
ContactnowformoredetailsaboutABS plastic pellets.
Kitty Liu< ###>
is one of the professional abs plastic pellets manufacturers, you can order high quality abs plastic pellets at good price from our factory.
ABS塑料颗粒。ABS塑料具有高吸湿性和湿敏性。成型前必须充分干燥和预热（在80~90℃下至少2小时），含水量控制在0.03%以下
2。ABS树脂的熔体粘度对温度不太敏感（与其他非晶态树脂不同）。虽然ABS的温度略高于PS，但它不能像PS那样有一个宽松的加热范围，也不能盲目地用来增加其粘度。可以通过提高螺杆转速或最大压力来提高其流动性。一般加工温度为190-235℃
现在联系我们
刘凯蒂是专业的abs塑料颗粒制造商之一，您可以从我们工厂以优惠的价格订购高品质的abs塑料颗粒
ABS Plastic Pellets
Architecture Decoration Industry
Transportation Industry, Advertisement Industry
Electric & Electrical, Chemical Machinery,
Automobile Industry
ABS Plastic Pellets
Product Details
ABS plastic pellets
1. ABS plastic has high hygroscopicity and moisture sensitivity. It must be fully dried and preheated (at least 2 hours at 80~90C) before molding, and the moisture content is controlled below 0.03%.
2. The melt viscosity of ABS resin is less sensitive to temperature (different from other amorphous resins). Although the temperature of ABS is slightly higher than that of PS, it cannot have a loose heating range like PS, and cannot be used blindly to increase its viscosity. It can be increased by increasing screw speed or maximum pressure to improve its fluidity. The general processing temperature is 190-235℃.
ContactnowformoredetailsaboutABS plastic pellets.
Kitty Liu< ###>
is one of the professional abs plastic pellets manufacturers, you can order high quality abs plastic pellets at good price from our factory.
Transportation Industry, Advertisement Industry
Electric & Electrical, Chemical Machinery,
Automobile Industry
评价
目前还没有评价