聚酰胺Pa66/尼龙66每公斤价格,中国供应商Prices Of Polyamide Pa66 /nylon 66 Per Kg,Chinese Supplier

¥1.00

聚酰胺Pa66/尼龙66每公斤的价格,中国供应商

Pa66(聚酰胺66)在高温下可以保持很强的强度和刚度。在PA系列中是机械强度最高、应用最广泛的品种,因为其结晶度高,所以硬度、耐热性都很高,高温电气插座零件、电气零件、齿轮、轴承、滚子、弹簧支架、滑轮、螺栓、叶轮、风机叶片、螺旋桨、高压密封篮、阀座、管道、储存容器、绳索、,电缆扎带、皮带、车轮捆扎带、电池盒、绝缘电气部件、铁芯、纺纱等

描述

聚酰胺Pa66/尼龙66每公斤的价格,中国供应商

Pa66(聚酰胺66)在高温下可以保持很强的强度和刚度。在PA系列中是机械强度最高、应用最广泛的品种,因为其结晶度高,所以硬度、耐热性都很高,高温电气插座零件、电气零件、齿轮、轴承、滚子、弹簧支架、滑轮、螺栓、叶轮、风机叶片、螺旋桨、高压密封篮、阀座、管道、储存容器、绳索、,电缆扎带、皮带、车轮捆扎带、电池盒、绝缘电气部件、铁芯、纺纱等

聚酰胺Pa66/尼龙66每公斤价格,中国供应商

产品详细信息

产品列表:

常用工程塑料:PC、ABS、PP、PA6、PA66、POM、PET、PBT、PPO、PMMA

特殊高聚物:PPA、PPS、PEI、PEEK

改性复合塑料:PMMA/ABS、PC/ABS、PC/PBT、PC/PET、PBT/PET、PBT/ABS等

与UL、SGS、,RoHS等级(ISO9001)

包装和储存:

1。包装:25Kg/袋内覆膜聚丙烯编织袋

2。储存:树脂应储存在通风干燥的仓库中,远离火灾和阳光直射。不应在露天堆放

3。运输:在运输过程中,产品不应暴露在强烈的阳光或雨水下,不应与沙子、土壤、废金属、煤炭或玻璃一起运输。严禁与有毒、腐蚀性、易燃物质一起运输

欢迎向我们提供反馈。更多细节和报价将发送给您

项目 典型特征测试标准

密度 1.18g/cm3

ASTM D-792
23℃时的成型收缩率

1.0-1.5%

ASTM D-955
吸水率 8.50%

ASTM D-570
吸湿性 2.30% ASTM D-570
抗拉强度 86MPa ASTM D-638
断裂伸长率<以10毫米/分钟的速度span>2.0-5.0%
ASTM D-638
<弯曲强度105MPa ASTM D-790
弯曲模量 2970MPa ASTM D-790
<伊佐德缺口冲击强度ASTM D-256
<摩擦系数□H(+23℃)静态止推垫圈测试3

摩擦系数 0.35
+73□H(+23℃)动态止推垫圈测试3

<熔点260℃ ASTM D-3418
热偏转温度 230℃

Prices Of Polyamide Pa66 /nylon 66 Per Kg,Chinese Supplier

PA66 (polyamide 66) at a high temperatures can maintain a strong strength and stiffness.In PA series is highest, the most widely used varieties of mechancial strength, because of its high crystallinity, so the rigidity, heat resistance are high, high temperature electrical sockets parts, electrical parts, gears, bearings, rollers, spring support, pulleys, bolts, impellers, fan blades, propellers, high pressure sealing baskets, valve seats, pipelines, storage containers, rope, cable ties, belts, wheel binders, battery boxes, insulated electric parts, core, spinning , etc……

Prices Of Polyamide Pa66 /nylon 66 Per Kg,Chinese Supplier

Product Details

>

Products list:

Common engineering plastics: PC, ABS, PP, PA6, PA66, POM, PET, PBT, PPO , PMMA

Special high polymer: PPA, PPS, PEI, PEEK

Modified compound plastics: PMMA/ABS, PC/ABS, PC/PBT, PC/PET, PBT/PET, PBT/ABS ETC

Thermoplastics: TPE, TPU, TPEE ETC

With UL, SGS, RoHS grades ( ISO9001)

Package & Storage:

1. Packing: 25Kg/bag internally film-coated polypropylene woven bags.

2. Storage : The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air.

3. Transportation : During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.

Welcome tosend us feedback.More details and quotation will be sent to you.

Item Typical Characteristic TestingStandard
Density 1.18g/cm3 ASTM D-792
Molding Shrinkage 1.0-1.5%
at 23℃
ASTM D-955
Water Absorption 8.50% ASTM D-570
Moisture absorption 2.30% ASTM D-570
Tensile Strength 86MPa ASTM D-638
Elongation at break 2.0-5.0%
at 10mm/min
ASTM D-638
FlexuralStrength 105MPa ASTM D-790
Flexural Modulus 2970MPa ASTM D-790
Izod Notched Impact Strength 36J/m ASTM D-256
Friction Coefficient 0.2
+73□H(+23℃) Static
Thrust Washer Test3
Friction Coefficient 0.35
+73□H(+23℃) Dynamic
Thrust Washer Test3
Melting Point 260℃ ASTM D-3418
Heat Deflection Temp 230℃ ASTM D-648

Go to Top