描述
聚碳酸酯+10%玻璃纤维
聚碳酸酯+10%玻璃纤维
聚碳酸酯PC塑料树脂，
注塑/挤出级PC树脂，
颜色可选，
优点高抗冲击性，易于成型，
玻璃纤维增强碳纤维增强，
阻燃级，增韧级，
包装25kg/袋（也可定制）
聚碳酸酯+10%玻璃纤维
产品详细信息
材质
聚碳酸酯+10%玻璃纤维Modle
KY-TR9002PC
类型
颗粒、颗粒、塑料树脂、夹子、颗粒
填充
玻璃纤维、碳纤维、caco3、Tac、PTFE、玻璃珠、Mos2等
颜色
根据需要
填充内容
5%-60%
抗紫外线、耐寒、耐热、增韧、高冲击、玻璃纤维/碳纤维增强等
聚碳酸酯+10%玻璃纤维
聚碳酸酯+10%玻璃纤维Modle
特征备注：玻璃纤维增强10%
重要参数：密度：1.25 g/cm3吸水率：0.12%缺口冲击强度：107拉伸强度：55 MPa断裂伸长率：15%弯曲强度：103 MPa弯曲模量：3445 MPa硬度：124维卡软化点：154℃热变形温度：142模具和浇口设计：
普通模具温度为80-100℃，玻璃纤维为100-130℃。小型产品可以使用针阀。浇口深度应为最厚部分的70%。其他大门是环形和矩形的。浇口越大，减少塑料过度剪切造成的缺陷越好。通风孔的深度应小于0.03-0.06mm，流道应尽可能短且圆，脱模坡度一般为30′-1左右
立即联系：特蕾西
Polycarbonate+10% Glass Fiber
Polycarbonate+10% glass fiber
polycarbonate PC plastic resin,
PC resin for injection/extrusion grade,
Color Any color is available,
Advantage High impact resistance, easily molding,
Galss fiber reinforced carbon fiber reinforced,
Fire retardant grade, toughen grade,
Packing 25kg/bag(also customizable).
Polycarbonate+10% Glass Fiber
Product Details
| Material |
Polycarbonate+10% glass fiber |
| Modle | KY-TR9002PC |
| Type | granules，pellets，plastic resin,clips,particle. |
| Filler | glass fiber , carbon fiber, caco3, Tac, PTFE ,glass bead,Mos2 and so on. |
| Color | As required |
| Filler content | 5%-60% |
| Anti-UV, Cold resistance,heat resistance,toughen,high impact ,glass/carbon fiber reinforeced and so on. | |
Polycarbonate+10% glass fiber
Feature Remarks: Glass fiber reinforced 10%
Important parameters: Density: 1.25 g/cm3 Water absorption: 0.12% Notched impact strength: 107 Tensile strength: 55 MPa Elongation at break: 15% Flexural strength: 103 MPa Flexural modulus: 3445 MPa Hardness: 124 Vicat softening point :154 ℃ Heat distortion temperature: 142 ℃
Mold and gate design:
The common mold temperature is 80-100℃, and the glass fiber is 100-130℃. Small products can use needle gates. The gate depth should be 70% of the thickest part. Other gates are ring and rectangular. The larger the gate, the better, to reduce defects caused by excessive shearing of the plastic. The depth of the vent hole should be less than 0.03-0.06mm, the runner should be as short and round as possible, and the demolding slope is generally about 30′-1.
More detail of Polycarbonate+10% glass fiber.Any interested in, pls kindly contact with me, we will talk further and send you our professional plan for your reference.
Contact now:Tracy<###>
评价
目前还没有评价