描述

聚碳酸酯颗粒/PC树脂每千克塑料原料的价格规格聚碳酸酯树脂（PC）用于光存储介质，它是：-高纯度-低粘度-易释放聚碳酸酯树脂（PC）是一种优良的工程热塑性塑料，具有良好的抗冲击性、易加工性、良好的尺寸稳定性、高耐热性等

聚碳酸酯颗粒/PC树脂每千克塑料原料的价格

产品详细信息

测试条件[状态] 典型特征 密度成型收缩率

3.2mm =“右边框宽度：1px；右边框颜色：黑色”width=“119”>

0.15% ASTM D-570 =“边框右宽度：1px；边框右颜色：黑色”width=“119”>

2.5g/10min ASTM D-1238 抗拉强度
屈服点断点>6265兆帕的拉伸速率 ASTM D-638 拉伸速率 断点 110% ASTM D-638

95MPa ASTM D-790 热变形温度

0.45MPa 138℃ ASTM D-648 维卡软化点=“高度：31px”>

CLTE

6.8×10 1/°C ASTM E-831

<

Polycarbonate Granules/ PC Resin Price Per Kg Plastic Raw Material

Specifications Polycarbonate Resin (PC) is used on optical storage media, it is: – High purity – Low viscosity – Easy release Polycarbonate Resin (PC) is an excellent engineering thermoplastic, with fine impact resistance, easily processing, good dimensional stability, high heat resistance,…

Polycarbonate Granules/ PC Resin Price Per Kg Plastic Raw Material

Product Details

PC Granules (Polycarbonate)

PC granuels is a linear carbonated polyester, the molecular carbonate groups and other groups are arranged alternately, these groups can be aromatic, can be aliphatic, or both.

The three major applications of PC engineering plastics are glass assembly industry, autombile industry, electronics and electrical appliance industry, followed by industrial machinery parts, CD-ROM, packaging, computer and other office equipment, medical and health care, film, leisure and protective equipment.

PC can be used as windows and doors, PC laminates are widely used in banks, embassies, detention centers and public places of protection windows for aircraft cabinets, lighting, industrial safety baffle and bullet-proof glass.

>

Item			Test conditions[status]			Typical Characteristic			Testing Standard
Density						1.2g/cm3			ASTM D-792
Molding Shrinkage			3.2mm			5-7 10-3			ASTM D-955
Water Absorption						0.15%			ASTM D-570
Melt Flow Rate						2.5g/10min			ASTM D-1238
Tensile Strength Yield Point Break Point						6265 MPaMPa			ASTM D-638
Tensile rate			Break point			110%			ASTM D-638
Flexural Strength						95MPa			ASTM D-790
Flexural Modulus						2345MPa			ASTM D-790
Notched impact strength			23°C			747J/m			ASTM D-256
Heat Deflection Temperature			0.45MPa			138℃			ASTM D-648
Vicat Softening Point						157℃			ASTM D-1525
CLTE						6.8×10 1/°C			ASTM E-831