描述

聚甲醛GF30%用于制造齿轮

1）聚甲醛填充30%玻璃纤维具有优异的机械强度；2） 聚甲醛填充30%玻璃纤维，硬度高，强度高；3聚甲醛填充30%玻璃纤维，耐磨性高；4） 聚甲醛填充30%玻璃纤维自润滑；5） 聚甲醛填充30%玻璃纤维高模量；6） 聚甲醛填充30%玻璃纤维耐化学腐蚀性等。

下载

聚甲醛GF30%用于制造齿轮

产品详细信息

出厂价！未经处理和回收的玻璃纤维增强聚甲醛树脂GF 10 15 20 25 30 35 40 45%

聚甲醛/聚甲醛颗粒，也称为超级钢与钢匹配，是一种高性能的工程塑料，可制成多种复合材料，以替代锌、青铜、铜、铜、铜、铜、铜、铜、铜、铜、铜、铜、铜、铜、铜、铜、铜、铜、铜、铜、铜、铜、铜、，铝和钢。作为五大工程塑料之一（PA、PC、POM、PET或PBT、PPO）

样品：我们相应地提供1至3kg的免费样品。快递费需要在发货前由客户预付

填充30%聚甲醛的玻璃纤维，用于制造齿轮

POM+玻璃纤维30%GF——虽然POM塑料原料在加工前不同于普通塑料原料，但不需要进行干燥处理，但加工过程中最好进行800高温预热。这样，成品的稳定性有很大的优势。如果POM材料在桶中放置时间过长，或温度过高，则更容易受到刺激。甲醛是甲醛的气体，同时，聚甲醛生产的产品收缩率一般较大，容易引起收缩或变形，而且在脱模过程中生产的产品非常热。有必要防止手指和POM塑料材料烧伤。适用于中、中速、低料温、高模温条件下成型。如果是更精密的产品，成型时需要控制模具温度

朱迪的联系人信息

<

是制造齿轮的专业聚甲醛gf30%制造商之一，您可以从我们工厂订购优质聚甲醛gf30%用于制造齿轮，价格优惠

Polyoxymethylene GF30% For Making Gears

1) Polyoxymethylene filled 30% glass fibe Excellent mechanical strength;2)Polyoxymethylene filled 30% glass fibeHigh hardness strength;3Polyoxymethylene filled 30% glass fibeHigh wear resistance;4)Polyoxymethylene filled 30% glass fibeSelf-lubrication;5)Polyoxymethylene filled 30% glass fibeHigher modulus;6)Polyoxymethylene filled 30% glass fibeChemical resistance and etc.

Download

Polyoxymethylene GF30% For Making Gears

Product Details

Factory Price! Virgin and recycled glass fiber reinforced Polyoxymethylene Resin GF 10 15 20 25 30 35 40 45%

Polyoxymethylene/POM Granules, also known as Super-Steel and Steel-Match, is a high performance engineering plastic and can be made into many kinds of componets as a substitute for Zinc, Bronze, Aluminum and steel. As one of the top 5 engineering plastics(PA, PC, POM, PET or PBT, PPO)

Sample: We provide free samples from 1 to 3kg accordingly. The express fee need to be prepaid by the customer before delivering.

Polyoxymethylene filled 30% glass fiberFor making gears.

POM + plus glass fiber 30% GF–Although POM plastic raw materials are different from ordinary plastic raw materials before processing, it is not necessary to carry out drying treatment, but it is better to carry out 800 high temperature preheating during processing. In this way, there is a great advantage in the stability of the finished product. If the POM material is placed in the barrel for too long, or the temperature is too high, it will be more prone to irritation. The formaldehyde gas of formaldehyde, at the same time, the shrinkage rate of the product produced by POM is generally large, and it is easy to cause shrinkage or deformation, and the produced product is very hot during demolding. It is necessary to prevent burns on fingers and POM plastic materials. It is suitable for molding under the condition of medium or medium speed, low material temperature and high mold temperature. If it is a more precise product, it is necessary to control the mold temperature when molding.

Judy’s contact information

Email:###

………………………………………………………………………………………………………………………………………………………………………………………..

is one of the professional polyoxymethylene gf30% for making gears manufacturers, you can order high quality polyoxymethylene gf30% for making gears at good price from our factory.