描述
聚甲醛原材料
聚甲醛原材料
多聚甲醛塑料，
注射/挤出级聚甲醛树脂，
颜色可选，
优点高抗冲击性，易于成型，
玻璃纤维增强碳纤维增强，
阻燃级，增韧级，
包装25kg/袋（也可定制）
聚甲醛原料
产品详细信息
| 材质 |
POM原材料 |
Modle | KY-TR7001 | 类型 | 颗粒、颗粒、塑料颗粒、夹子、颗粒 |
| 填充 | <玻璃纤维、碳纤维、caco3、Tac、PTFE、玻璃珠、Mos2等 |
| 颜色 | 根据需要 | 5%-60% |
| 抗紫外线、耐寒、耐热、增韧、高冲击、玻璃纤维/碳纤维增强等 |
聚甲醛原材料聚甲醛是一种坚硬致密的材料，表面光滑、有光泽，浅黄色或白色，薄壁部分半透明。燃烧特性容易燃烧，离开火后会继续燃烧。火焰上端为黄色，下端为蓝色，熔化滴落，有强烈的刺鼻甲醛味和腥味
比重为1.41-1.43 g/cm3，成型收缩率为1.2-3.0%，成型温度为170-200℃，干燥条件为80-90℃，干燥2小时。POM的长期耐热性不高，但短期内可达到160°C。均聚POM的短期耐热性比共聚POM高10℃以上，但长期耐热性比均聚POM高10℃左右。可在-40℃~100℃的温度范围内长期使用。POM易分解，分解温度280℃，分解过程中会产生刺激性和腐蚀性气体。因此，模具钢应采用耐腐蚀材料制成
聚甲醛原材料的更多细节如果您对纽约感兴趣，请与我联系，我们将进一步讨论，并发送我们的专业计划供您参考<br/>
POM Raw Material
POM raw material
Paraformaldehyde plastic,
POM resin for injection/extrusion grade,
Color Any color is available,
Advantage High impact resistance, easily molding,
Galss fiber reinforced carbon fiber reinforced,
Fire retardant grade, toughen grade,
Packing 25kg/bag(also customizable).
POM Raw Material
Product Details
| Material |
POM raw material |
| Modle | KY-TR7001 |
| Type | granules，pellets，plastic granule,clips,particle. |
| Filler | fibre galss , carbon fiber, caco3, Tac, PTFE ,glass bead,Mos2 and so on. |
| Color | As required |
| Filler content | 5%-60% |
| Anti-UV, Cold resistance,heat resistance,toughen,high impact ,glass/carbon fiber reinforeced and so on. | |
POM raw material
Polyoxymethylene is a hard and dense material with a smooth, shiny surface, light yellow or white, and the thin wall part is translucent. The burning characteristic is easy to burn, and it will continue to burn after leaving the fire. The upper end of the flame is yellow and the lower end is blue, melting and dripping occur, and there is a strong pungent formaldehyde smell and fishy smell.
The specific gravity is 1.41-1.43 g/cm3, the molding shrinkage rate is 1.2-3.0%, the molding temperature is 170-200℃, and the drying condition is 80-90℃ for 2 hours. The long-term heat resistance of POM is not high, but it can reach 160°C in the short term. The short-term heat resistance of homopolymerized POM is more than 10°C higher than that of copolymerized POM, but the long-term heat-resistant copolymerized POM is about 10°C higher than that of homopolymerized POM. It can be used for a long time in the temperature range of -40℃~100℃. POM is easy to decompose, the decomposition temperature is 280℃, and irritating and corrosive gases will occur during decomposition. Therefore, the mold steel should be made of corrosion-resistant materials.
More detail of POM raw material.Any interested in, pls kindly contact with me, we will talk further and send you our professional plan for your reference.
Contact now:Tracy<###>
评价
目前还没有评价