描述

碳纤维级聚甲醛复合树脂

产品名称：最佳成型性聚甲醛

颜色：根据需要

优势：

具有竞争力的价格、高品质、准时交货、免费样品

环保

高耐热性，高抗冲击性

无任何杂质

可使用玻璃纤维/韧性/阻燃剂/紫外线稳定剂增强

包装：25kg/袋（也可定制）

碳纤维级聚甲醛复合树脂

产品细节

碳纤维级聚甲醛复合树脂

聚甲醛的塑料特性

1）热稳定性差：当加热到240°C时，聚甲醛迅速分解并变黄。210°C下的停留时间不得超过20分钟。应尽可能采用较低的成型温度和较短的成型周期，以确保材料在整个成型过程中流动

2）快速固化时间：由于POM的固化温度在160°C左右，且其固化速度快于其熔化速度，因此可以快速脱模和冷却。由于固化速度快，产品表面更容易出现流痕和焊接痕等缺陷

3吸水率低：POM吸收约0.25%的水分，水分对其性能或成型过程的影响最小，因此成型前可能不需要干燥。然而，当颗粒表面吸附水分时，产品会得到改善。根据它的外观，它仍然需要烘干

是一家专业的碳纤维级聚甲醛复合树脂制造商，您可以从我们工厂以优惠的价格订购高品质的碳纤维级聚甲醛复合树脂

Carbon Fiber Grade Pom Compound Resin

Product name: Best formability POM
Color: As required
Advantage:
Competitive price,high quality,on-time delivery,free sample
Environment friendly
High Heat Resistance,High impact resistance
Without any impurity
Can be reinforced with the glass fiber/toughness/flame retardant/UV stabilizer
Packing: 25kg/bag (also can be customized)

Carbon Fiber Grade Pom Compound Resin

Product Details

Carbon Fiber Grade pomcompound resin

Plastic characteristics of POM

1) Poor thermal stability: When heated to 240°C, POM decomposes rapidly and becomes yellow. The residence period at 210°C cannot exceed 20 minutes. A lower molding temperature and a shorter molding cycle should be employed as much as feasible to ensure material flow throughout the molding process.

2) Quick curing time: Because POM’s solidification temperature is around 160°C and its solidification pace is quicker than its melting speed, it may swiftly demold and cool. Defects like as flow markings and welding marks are more likely to emerge on the product’s surface due to the quick cure speed.

3 Low water absorption: POM absorbs around 0.25 percent of water, and moisture has minimal influence on its performance or molding process, so it may not need to be dried before molding. However, when the surface of the particles adsorbs water, the product will improve. It still has to be dried, based on its look.

is one of the professional carbon fiber grade pom compound resin manufacturers, you can order high quality carbon fiber grade pom compound resin at good price from our factory.