描述
碳纤维增强Pc Cf20 Gf35%可回收塑料颗粒
产品说明规格聚碳酸酯树脂（Pc）用于光存储介质，它是：-高纯度-低粘度-易释放聚碳酸酯树脂（Pc）是一种优良的工程热塑性塑料，具有良好的抗冲击性，易于加工，良好的尺寸稳定性，高
碳纤维增强Pc Cf20 Gf35 35%再生塑料颗粒
产品详细信息
常见工程塑料：PC、ABS、PP、PA6、PA66、POM、PET、PBT
特殊高聚物：PPA、PPS、PEI、PEEK
改性复合塑料：PMMA/ABS、PC/ABS、PC/ABS、PC/PBT、PC/PET、PBT/PET、PBT/TPE等，TPEE等符合UL、SGS、RoHS（ISO9001）标准。
性能：复合聚碳酸酯PC塑料颗粒具有高透明度、高冲击性、高强度、高抗蠕变性、优异的尺寸稳定性、良好的低温耐热性、阻燃性
Product Description Specifications Polycarbonate Resin (PC) is used on optical storage media, it is: – High purity – Low viscosity – Easy release Polycarbonate Resin (PC) is an excellent engineering thermoplastic, with fine impact resistance, easily processing, good dimensional stability, high…
项目
试验条件[状态]
典型性能
测试标准
密度=“边框右宽度：1px；边框右颜色：黑色；边框左：无”colspan=“3”>ASTM D-792
项目
测试条件
典型特征
测试标准
熔流速率
300℃/1.2kg
1
6g/10min
=“193”colspan=“3”>模压收缩率
3.0mm
=“右边框宽度：1px；右边框颜色：黑色；左边框：无”colspan=“3”>0.24%
ASTM D-570
屈服点断点
突破点
突破点
3“>3” 2355MPa
ASTM D-790
Carbon Fiber Reinforced Pc Cf20 Gf35 35% Recycled Plastic Pellets
Carbon Fiber Reinforced Pc Cf20 Gf35 35% Recycled Plastic Pellets
Product Details
Products list:
Common engineering plastics: PC, ABS, PP, PA6, PA66, POM, PET, PBT
Special high polymer: PPA, PPS, PEI, PEEK
Modified compound plastics: PMMA/ABS, PC/ABS, PC/PBT, PC/PET, PBT/PET, PBT/ABS ETC
Thermoplastics: TPE, TPU, TPEE ETC
With UL, SGS, RoHS grades ( ISO9001)
Property: Compound Polycarbonate PC Plastic Granule with high transparency, high impact, high strength, high creep resistance, excellent dimensional stability, good resistance to low-temperature and heat, flame retardant.
PC has been widely used in building decoration industry, transportation industry, the advertising industry, agriculture and electronic & electrical appliances and other fields.
| 项目 | 试验条件[状态] | 典型性能 | 测试标准 | ||||||||
| Item | Test conditions | Typical Characteristic | TestingStandard | ||||||||
| Density | 1.2g/cm3 | ASTM D-792 | |||||||||
| MeltFlow Rate | 300°C/1.2kg | 16g/10min | ASTM D-1238 | ||||||||
| MoldingShrinkage | 3.0mm | 0.5-0.7% | ASTM D-955 | ||||||||
| Water Absorption | 0.24% | ASTM D-570 | |||||||||
| Tensile Strength Yield Point Break Point |
3.2mm | 64Mpa | ASTM D-638 | ||||||||
| Tensilerate | Break point | 123% | ASTM D-638 | ||||||||
| FlexuralStrength | 6.4mm | 95MPa | ASTM D-790 | ||||||||
| FlexuralModulus | 6.4mm | 2355MPa | ASTM D-790 | ||||||||
| Notchedimpact strength | 23°C | 830J/m | ASTM D-256 | ||||||||
| HeatDeflection Temperature | 0.45MPa | 138℃ | ASTM D-648 | ||||||||
| VicatSoftening Point | 157℃ | ASTM D-1525 | |||||||||
| CLTE | 6.8×10 1/°C | ASTM E-831 |
评价
目前还没有评价