描述

尼龙静电平衡导电防静电PA66树脂

一,。增强PA66材料

2。用于注射成型

3。机械强度高

4。免费样品

尼龙静电平衡导电防静电PA66树脂

产品细节

尼龙防静电导电防静电PA66树脂

防静电PA66材料工艺条件干燥处理：如果预处理材料密封，则无需干燥。但是，如果打开储存容器，建议在85℃的热空气中干燥。如果湿度大于0.2%，则需要105℃和12小时的真空干燥。熔化温度：260至290摄氏度。玻璃添加剂的产品温度为275至280摄氏度。熔化温度应避免超过300摄氏度。模具温度：建议在80摄氏度。模具温度会影响结晶，结晶会影响产品的物理性能。对于薄壁塑料零件，如果模具温度低于40摄氏度，塑料零件的结晶会随着时间而变化，为了保持塑料零件的几何稳定性，需要进行退火处理。注射压力：通常在750到1250巴之间，取决于材料和产品设计。优点：1、抗拉强度高；2、坚韧、耐冲击的特殊材料；3、自润，耐磨性好，抗药性优异；4、低温特性好；5.具有自熄功能

是专业的尼龙防静电导电pa66树脂制造商之一，您可以从我厂以优惠的价格订购高品质的尼龙防静电导电pa66树脂

Nylon Static Dispassive Conductive Anti-Static PA66 Resin

.
1. Reinforced PA66 Material
2. Used for Injection Molding
3. High mechanical strength
4. FREE SAMPLE

Nylon Static Dispassive Conductive Anti-Static PA66 Resin

Product Details

Nylon Static Dispassive Conductive Anti-Static PA66 Resin

Anti-static PA66 material process conditions drying treatment: If the pre-processing material is sealed, then there is no need to dry. However, if the storage container is opened, it is recommended to dry it in hot air at 85 degrees C. If the humidity is greater than 0.2%, a vacuum drying of 105 degrees C and 12 hours is required. Melting temperature: 260 to 290 degrees C. The products for glass additives are 275 to 280 degrees C. Melting temperatures should be avoided above 300 degrees C. Mold temperature: Recommended at 80 degrees C. Mold temperature will affect crystallization, and crystallization will affect the physical properties of the product. For thin-walled plastic parts, if the mold temperature is less than 40 degrees C, the crystallization of the plastic parts will change over time, in order to maintain the geometric stability of the plastic parts, annealing treatment is required. Injection pressure: Usually between 750 and 1250 bar, depending on the material and product design. Advantages: 1, with high tensile strength; 2, tough, impact-resistant special; 3, self-run, good wear resistance, excellent drug resistance; 4, low temperature characteristics are good; 5, with self-extinguishing;

is one of the professional nylon static dispassive conductive anti-static pa66 resin manufacturers, you can order high quality nylon static dispassive conductive anti-static pa66 resin at good price from our factory.