描述

增强型聚甲醛树脂

1）聚甲醛20%玻璃纤维，具有优异的机械强度

2）POM 20%玻璃纤维，用于承载高硬度强度

3）POM 20%玻璃纤维，具有高耐磨性

4）轴承自润滑用POM 20%玻璃纤维

5）POM 20%玻璃纤维，用于承载更高的模量

6）POM 20%玻璃纤维，用于耐化学腐蚀等。

增强聚甲醛树脂

POM增强改性的主要研究方向包括长玻璃纤维增强改性、短玻璃纤维增强改性、碳纤维增强改性和其他增强改性。通过增强改性，聚甲醛的拉伸强度、弯曲强度和模量可提高100%，冲击强度也显著提高

◆长玻璃纤维增强聚甲醛

长玻璃纤维能显著提高聚甲醛的抗拉强度、刚度、抗疲劳性、抗蠕变性和热变形温度。然而，POM的缺口冲击强度不能得到很大提高

◆碳纤维增强聚甲醛

碳纤维在提高聚甲醛的刚度、抗疲劳性、抗蠕变性和抗拉强度方面远远优于玻璃纤维，能赋予聚甲醛良好的导电性和摩擦磨损特性

◆短玻璃纤维、玻璃微珠、滑石粉等增强聚甲醛。

添加短玻璃纤维或玻璃微珠复合增强聚甲醛的方法略差于长玻璃纤维，但各种短玻璃纤维增强聚甲醛产品已广泛用于工业生产。采用各种无机刚性颗粒填料对聚甲醛进行填充和改性，其中滑石本身具有较高的硬度，可以增强聚甲醛以保持良好的拉伸强度，是增强聚甲醛的填料

◆其他改性增强聚甲醛

钛酸钾晶须对聚合物材料具有良好的增强效果，对摩擦损失性能影响不大。采用纳米填料可以同时达到提高POM刚性和韧性的目的，但添加量不宜过多

是一家专业的增强型聚甲醛树脂制造商，您可以从我们工厂以优惠的价格订购高品质的增强型聚甲醛树脂

Enhanced POM Resin

1)POM 20% Glass Fiber for Bearing Excellent mechanical strength;
2)POM 20% Glass Fiber for Bearing High hardness strength;
3)POM 20% Glass Fiber for Bearing High wear resistance;
4)POM 20% Glass Fiber for Bearing Self-lubrication;
5)POM 20% Glass Fiber for Bearing Higher modulus;
6)POM 20% Glass Fiber for Bearing Chemical resistance and etc.

Enhanced POM Resin

Product Details

Enhanced POM Resin

Enhanced Modification Methods of POM

The main research directions of POM reinforcement modification include long glass fiber reinforcement modification, short glass fiber reinforcement modification, carbon fiber reinforcement modification, and other reinforcement modification. The tensile strength, flexural strength and modulus of polyoxymethylene can be increased by 100% through reinforcement modification, and the impact strength is also significantly improved.

◆Long glass fiber reinforced POM

Long glass fibers can greatly improve the tensile strength, rigidity, fatigue resistance, creep resistance and thermal deformation temperature of POM. However, the notched impact strength of POM cannot be greatly improved.

◆Carbon fiber reinforced polyoxymethylene

Carbon fiber is far superior to glass fiber in improving the rigidity, fatigue resistance, creep resistance and tensile strength of POM, and can endow POM with good electrical conductivity and friction and wear characteristics.

◆Polyoxymethylene reinforced with short glass fiber, glass microbeads, talcum powder, etc.

The method of adding short glass fiber or glass microbeads for compound reinforcement of POM is slightly worse than that of long glass fiber, but various short glass fiber reinforced POM products have been widely used in industrial production. Various inorganic rigid particle fillers are used to fill and modify POM, among which talc itself has high hardness and can enhance POM to maintain good tensile strength, so it is a filler for reinforcing POM.

◆Other modified reinforced polyoxymethylene

Potassium titanate whiskers have a good reinforcing effect on polymer materials and have little effect on friction loss performance. By using nano-scale fillers, the purpose of improving the rigidity and toughness of POM can be achieved at the same time, but the addition amount should not be too much.

Contactnowformoredetailsabout Enhanced POM Resin.

is one of the professional enhanced pom resin manufacturers, you can order high quality enhanced pom resin at good price from our factory.