描述

医疗设备用原发聚醚酰亚胺塑料颗粒

PEI/PEEK颗粒

具有优异的机械性能、电气绝缘性能、耐辐射性、耐高温性和耐磨性，并可通过微波

医用设备用初级聚醚酰亚胺塑料颗粒

产品详细信息

医疗设备用原发聚醚酰亚胺塑料颗粒

聚醚胺树脂的长期使用温度为338T和356T（取决于等级），燃烧等级为UL94V-0（10密耳厚度）。氧指数为47，聚醚酰亚胺符合FAA阻燃剂和飞机内部要求的热稀释材料标准。它的玻璃化转变温度为419F，并允许在392F下间歇使用，从而在较高温度下产生短期偏移。在356T时，拉伸温度和挠曲模量分别高于41和2068MPa。在接近玻璃态转变的温度下，玻璃纤维和碳纤维增强材料具有较高的强度和刚度。聚醚酰胺在高温和应力下的长期抗蠕变性能使其能够在许多结构设备中取代金属和其他材料。在可变温度、湿度和频率条件下具有良好的电气性能。GHz频率下的低损耗因数使聚醚酰胺具有很高的微波耐磨性。在250F100%R.H.和207kPa水萃取导电率下120小时的条件下，它具有低水平的离子型污染物，在超过20兆周的条件下，它可以用作电子传感器组件的绝缘材料。PEI是一种优良的涂层和成膜材料，可形成适用于电子行业的涂层和薄膜，可用于制造孔径<0.1 m的微孔隔膜。它还可用作高温粘合剂和高强度纤维

是医疗设备制造商的专业初级聚醚酰亚胺塑料颗粒之一，您可以从我们工厂以优惠的价格订购医疗设备用初级聚醚酰亚胺塑料颗粒

Primary Virgin Polyetherimide Plastic Pellets For Medical Equipment

PEI/PEEK Pellets
Excellent mechanical properties, electrical insulation properties, radiation resistance, high temperature resistance and wear resistance, and through the microwave.

Primary Virgin Polyetherimide Plastic Pellets For Medical Equipment

Product Details

Primary Virgin polyetherimide plastic pellets for medical equipment

The long-term use temperature of polyetheramine resin is 338T and 356T (depending on grade) and the combustion grade is UL94V-0 (10 mil thickness). The oxygen index is 47, and polyetherimide meets the FAA flame retardant and thermally diluted material standards required by the aircraft interior. It has a glass transition temperature of 419F and allows intermittent use at 392F, resulting in short-term offsets at higher temperatures. At 356T, the tensile temperature and deflection modulus are above 41 and 2068MPa, respectively. The glass fiber and carbon fiber-reinforced materials have higher strength and stiffness at the temperature of close to the glass state transition. Polyetheramide’s long-term anti-creep at high temperatures and stresses allows it to replace metals and other materials in many structural devices. Good electrical performance at variable temperature, moisture and frequency conditions. The low loss factor at GHz frequencies makes polyetheramide highly microwave wearable. It has low levels of ion-type contaminants at 250F100% R. H． And 120 hours under 207kPa water extraction conductivity, at more than 20 megacycles, it can be used as an insulation material for electronic sensor components. PEI is an excellent coating and filmmaking material that forms coatings and films suitable for the electronics industry and can be used to manufacture microporous diaphragms with aperture < of 0.1 m. It can also be used as a high temperature adhesive and high-strength fibers.

is one of the professional primary virgin polyetherimide plastic pellets for medical equipment manufacturers, you can order high quality primary virgin polyetherimide plastic pellets for medical equipment at good price from our factory.