描述

加纤维20%聚苯硫醚

所有先进工程塑料中最广泛的耐化学品性

改善了聚苯硫醚的尺寸稳定性和热性能

将强度保持在425ºF以上

对蒸汽、强碱、燃料不敏感，酸

最小吸水率

优良的电绝缘体

极低的线性热膨胀系数

加上20%聚苯硫醚纤维

产品详细信息

加上20%PPS纤维

<，是目前高温热塑性工程塑料之一。长期使用温度为220~240℃，短期使用温度可达260℃
聚苯硫醚纤维增强20%耐化学性：目前，在200℃以下没有溶剂可以溶解聚苯硫醚纤维增强，并且对无机酸、碱和盐具有极高的耐腐蚀性
聚苯硫醚纤维增强20%电气性能：在高温、高湿、高频环境下，具有高体积电阻率、表面电阻率、击穿电压、低介电常数和介质损耗角正切，是优良的绝缘材料。改性后，还可以制成导电性好的高强度材料
PPS纤维增强20%的机械性能：极强的刚性，高表面硬度，优异的抗蠕变和抗疲劳性能

PPS+20%纤维具有硬脆、结晶度高、阻燃、热稳定性好、机械强度高、电性能优异等优点。20%聚苯硫醚纤维是工程塑料中耐热性好的品种之一。热变形温度一般大于260度，耐化学性仅次于聚四氟乙烯，流动性仅次于尼龙。此外，它还具有成型收缩率低（约0.08%）、吸水率低（约0.02%）、耐火性好、耐振动和疲劳性好的优点

刘凯蒂

是一家专业的20%聚苯硫醚加纤生产商，您可以从我们工厂以优惠的价格订购高品质的20%聚苯硫醚加纤

Plus Fiber 20% PPS

Broadest resistance to chemicals of all advanced engineering plastics
Improved dimensional stability and thermal performance over PPS
Maintains strength above 425º F
Inert to steam, strong bases, fuels, and acids
Minimal water absorption
Excellent electrical insulator
Very low coefficient of linear thermal expansion

Plus Fiber 20% PPS

Product Details

plus fiber 20% PPS

PPS fiber reinforced 20% heat resistance: The heat distortion temperature exceeds 260℃, which is one of the thermoplastic engineering plastics with high temperature at present. The long-term use temperature is 220~240℃, and the short-term use temperature can reach 260℃.
PPS fiber reinforced 20% chemical resistance: At present, there is no solvent that can dissolve PPS fiber reinforced below 200 ℃, and it is extremely resistant to inorganic acids, alkalis and salts.
PPS fiber reinforced 20% electrical performance: in high temperature, high humidity, high frequency environment, it has high volume resistivity, surface resistivity, breakdown voltage, low dielectric constant and dielectric loss tangent, which is excellent Insulation material. After modification, it can also be made into high-strength materials with good electrical conductivity.
PPS fiber reinforced 20% mechanical properties: extremely strong rigidity, high surface hardness, and excellent creep resistance and fatigue resistance.

PPS plus 20% fiber has the advantages of hard and brittle, high crystallinity, flame retardant, good thermal stability, high mechanical strength, and excellent electrical properties. PPS plus fiber 20% is one of the varieties with good heat resistance in engineering plastics. The heat distortion temperature is generally greater than 260 degrees, the chemical resistance is second only to polytetrafluoroethylene, and the fluidity is second only to nylon. In addition, it also has the advantages of low molding shrinkage (about 0.08%), low water absorption (about 0.02%), good fire resistance, and good vibration and fatigue resistance.

Contactnowformoredetailsabout Plus Fiber 20% PPS.

Kitty Liu< ###>

is one of the professional plus fiber 20% pps manufacturers, you can order high quality plus fiber 20% pps at good price from our factory.