描述
丙烯腈-丁二烯-苯乙烯塑料
冲击强度高，化学稳定性好，电气性能好
与聚甲基丙烯酸甲酯、镀铬和喷漆具有良好的焊接性
高冲击、高热、阻燃、增强等
流动性比HIPS稍差，优于PMMA、PC等
适用于一般机械零件、耐磨/耐磨零件、
传动零件和通讯零件
丙烯腈-丁二烯-苯乙烯塑料
产品详细信息
| 材质： |
丙烯腈-丁二烯-苯乙烯共聚物 |
|
| Modle: | KY-TR2010 | 类型： | 颗粒、颗粒、塑料树脂、夹子、颗粒 |
| 填充： | 玻璃纤维、碳纤维、caco3、Tac、PTFE、玻璃珠、Mos2等 | |
| Color | 根据需要width=“89”>填充内容： | 5%-60% |
| 抗紫外线、耐寒、耐热、增韧、高冲击、玻璃纤维/碳纤维增强等 |
丙烯腈-丁二烯-苯乙烯共聚物
典型应用：
汽车（仪表板、工具舱口、轮罩、镜盒等）、冰箱、高强度工具（吹风机、搅拌机、食品处理器、割草机等）、电话外壳、打字机键盘、高尔夫球车和喷射滑雪板等休闲车辆
注射模工艺条件：丙烯腈-丁二烯-苯乙烯共聚物
1）干燥处理：ABS材料具有吸湿性，需要在加工前进行干燥处理。建议在80～90℃下干燥至少2小时。材料温度应低于0.1%
熔融温度：210～280℃；推荐温度：245℃
3）模具温度：25～70℃。（模具温度会影响塑料零件的光洁度，温度越低，光洁度越低）
注射压力：500～1000bar
5）注射速度：中高速
6）重要参数：
熔体流动速率：3g/10min
密度：1.05g/cm3
模具收缩率：0.55%
缺口冲击强度：19
拉伸强度：47MPa
断裂伸长率：20%
弯曲强度：78MPa
弯曲模量：2352MPa
维卡软化点：135℃
热变形温度：115℃
更多细节丙烯腈-丁二烯-苯乙烯共聚物。有兴趣的请随时联系我们
立即联系：特蕾西<####>
Acrylonitrile-butadiene-styrene Plastic
High impact strength,chemical stability,good electrical properties;
It has good weldability with PMMA,chrome-plated and painted;
High impact,high heat,flame retardant,reinforced and so on
Fluidity is a little worse than HIPS, better than PMMA, PC, etc.
Suitable for general mechanical parts, wear-reducing/resistant parts,
Transmission parts and telecommunications parts.
Acrylonitrile-butadiene-styrene Plastic
Product Details
| Material： |
Acrylonitrile-butadiene-styrene copolymer |
| Modle: | KY-TR2010 |
| Type： | granules，pellets，plastic resin,clips,particle. |
| Filler: | glass fiber , carbon fiber, caco3, Tac, PTFE ,glass bead,Mos2 and so on. |
| Color | As required |
| Filler content : | 5%-60% |
| Anti-UV, Cold resistance,heat resistance,toughen,high impact ,glass/carbon fiber reinforeced and so on. | |
Acrylonitrile-butadiene-styrene copolymer
Typical application:
Automobiles (dashboards, tool hatches, wheel covers, mirror boxes, etc.), refrigerators, high-strength tools (hair dryers, blenders, food processors, lawn mowers, etc.), telephone casings, typewriter keyboards , Recreational vehicles such as golf carts and jet skis.
Injection mold process conditions:Acrylonitrile-butadiene-styrene copolymer.
1)Drying treatment: ABS material is hygroscopic and requires drying treatment before processing. The recommended drying condition is at least 2 hours at 80～90℃. The material temperature should be less than 0.1%.
2)Melting temperature: 210～280℃; recommended temperature: 245℃.
3)Mold temperature: 25～70℃. (Mold temperature will affect the finish of plastic parts, lower temperature will result in lower finish).
4)Injection pressure: 500～1000bar.
5)Injection speed: medium to high speed.
6)Important parameters:
Melt flow rate: 3 g/10min
Density: 1.05 g/cm3
Mold shrinkage: 0.55%
Notched impact strength: 19
Tensile strength: 47 MPa
Elongation at break: 20%
Bending strength: 78 MPa
Flexural modulus: 2352 MPa
Vicat softening point: 135 ℃
Heat distortion temperature: 115 ℃
More detail of Acrylonitrile-butadiene-styrene copolymer.Any interesting ,please feel free contact us.
Contact now:Tracy<###>
评价
目前还没有评价