描述

适用于伸缩装置的PPS塑料1

所有先进工程塑料中最广泛的耐化学品性

比PPS改进的尺寸稳定性和热性能

保持强度在425ºF以上

对蒸汽、强碱、燃料和水不起作用，酸

最小吸水率

优良的电绝缘体

极低的线性热膨胀系数

PPS塑料应用于伸缩臂1

产品详细信息

用于望远镜的PPS塑料

注射成型工艺：

烘烤温度：130-150℃3-4小时模具温度：120-150℃

<300～320℃

后段：300～320℃

喷嘴：290～320℃

喷射压力：50～100Mpa

喷射速度：中速，有时为了获得良好的外观，可以使用高速喷射，但是你必须注意产品翘曲和烧焦的可能性。背压：为确保准确测量，背压应为0.1-1.0MPa。螺杆转速：通常为40-100rpm，不要太高。注射时间：根据零件尺寸确定，最好用零件填充模具，表面基本冷却成型

3。后处理技术：由零件的尺寸决定加工温度：160～180℃

加工时间：4～16小时

请联系我们，了解有关PPS塑料应用于望远镜的详细信息

是伸缩器1制造商使用的专业pps塑料之一，您可以从我们工厂以优惠的价格订购适用于伸缩器1的高质量pps塑料

PPS Plastic Applied To Telescope1

Broadest resistance to chemicals of all advanced engineering plastics
Improved dimensional stability and thermal performance over PPS
Maintains strength above 425º F
Inert to steam, strong bases, fuels, and acids
Minimal water absorption
Excellent electrical insulator
Very low coefficient of linear thermal expansion

PPS Plastic Applied To Telescope1

Product Details

PPS plastic applied to telescope

Injection molding process:

Baking temperature: 130-150℃ 3-4 hours Mold temperature: 120～150℃

Barrel temperature: front section: 270～290℃

Middle section: 300～320℃

Back section: 300～320℃

Nozzle: 290～320℃

Injection pressure: 50～100Mpa

Injection speed: medium speed, sometimes in order to get a good appearance, high-speed injection can be used, but you must pay attention to the possibility of warping and scorching of the product

Back pressure: To ensure accurate measurement, the back pressure should be 0.1-1.0 Mpa

Screw speed: usually 40-100rpm, not too high

Injection time: Determined according to the size of the part, it is better to fill the mold with the part and the surface is basically cooled and shaped.

3. Post-processing technology: Determined by the size of the part

Processing temperature: 160～180℃

Processing time: 4～16hr

Contactnowformoredetailsabout PPS plastic applied to telescope.

Kitty Liu< ###>

is one of the professional pps plastic applied to telescope1 manufacturers, you can order high quality pps plastic applied to telescope1 at good price from our factory.