描述
POM动力阀用工程塑料POM材料
产品名称：最佳成型POM
颜色：根据需要
优点：
具有竞争力的价格、高质量、准时交货、免费样品
环保
高耐热性，高抗冲击性
无任何杂质
可使用玻璃纤维/韧性/阻燃剂/紫外线稳定剂增强
包装：25kg/袋（也可定制）
POM动力阀用工程塑料POM材料
产品详细信息
为POM动力阀设计塑料POM材料
1。POM的熔体粘度对剪切速率敏感。因此，为了提高熔体流动性，不仅可以单独提高温度，还可以提高注射速率和注射压力。对于大浇口、短厚壁工艺和小面积的产品，注射压力为40至80MPa；一般产品的压力约为100兆帕。具有小浇口、薄壁长流程和大面积的产品具有120至140 MPa的高注射压力
2。模具温度一般控制在80～100℃，这对薄壁长流程有一定的影响
应用：
聚甲醛动力阀width=“4%”> | Engineer Plastic POM Materials For POM Power ValveProduct name: Best formability POM Engineer Plastic POM Materials For POM Power Valve Product DetailsEngineer Plastic POM Materials for POM Power valve1. The melt viscosity of POM is sensitive to the shear rate. Therefore, in order to improve the melt fluidity, it is not possible to increase the temperature alone, but also to increase the injection rate and injection pressure. For products with large gates, short thick-wall processes, and small areas, the injection pressure is 40 to 80 MPa; general products are about 100 MPa. Products with small gates, thin-walled long processes, and large areas have high injection pressures of 120 to 140 MPa. 2. The mold temperature is usually controlled at 80 ～ 100 ℃, which has a certain effect on the thin-walled long process. Application :
您必须登录才能发表评价。 相关产品 |
评价
目前还没有评价