描述
PEI 1010塑料树脂
PEI 1010塑料树脂
聚醚酰亚胺PEI塑料树脂，
注射/挤出级PEI树脂，
颜色可供选择，
优点高抗冲击性，易于成型，
玻璃纤维增强碳纤维增强，
阻燃级，增韧级，
包装25kg/袋（也可定制）
PEI 1010塑料树脂
产品详细信息
材质PEI 1010塑料树脂
ModleKY-TR8001类型颗粒、颗粒、塑料树脂、夹子、颗粒填充玻璃纤维、碳纤维、caco3、Tac、PTFE、玻璃珠、Mos2等颜色根据需要填充内容5%-60%抗紫外线、耐寒、耐热、增韧、高冲击、玻璃纤维/碳纤维增强等PEI 1010塑料树脂是一种透明的琥珀色无定形热塑性塑料，无毒、无味、吸水率低（0.25%）
PEI的优异性能体现在机械性能上。屈服时的抗拉强度高达15000磅/平方英寸，甚至高达190度，可达到6000磅/平方英寸，弯曲模量可达到48万磅/平方英寸。弯曲模量甚至高达每平方英寸1700000磅；就力学性能而言，聚乙烯亚胺堪称工程塑料之王
注射模工艺条件：
干燥处理：PEI具有吸湿性，可导致材料降解。湿度值应小于0.02%。建议干燥条件为150°C，持续4小时
更多关于PEI 1010塑料树脂的详细信息，如有兴趣，请与我联系，我们将进一步讨论并发送我们的专业计划供您参考
立即联系：特蕾西
PEI 1010 Plastic Resin
PEI 1010 plastic resin
polyetherimide pei plastic resin,
PEI resin for injection/extrusion grade,
Color Any color is available,
Advantage High impact resistance, easily molding,
Galss fiber reinforced carbon fiber reinforced,
Fire retardant grade, toughen grade,
Packing 25kg/bag(also customizable).
PEI 1010 Plastic Resin
Product Details
| Material | PEI 1010 plastic resin |
| Modle | KY-TR8001 |
| Type | granules，pellets，plastic resin,clips,particle. |
| Filler | glass fiber , carbon fiber, caco3, Tac, PTFE ,glass bead,Mos2 and so on. |
| Color | As required |
| Filler content | 5%-60% |
| Anti-UV, Cold resistance,heat resistance,toughen,high impact ,glass/carbon fiber reinforeced and so on. | |
PEI 1010 plastic resin
PEI is a transparent amber amorphous thermoplastic-non-toxic, odorless, and low water absorption (0.25%)
The outstanding performance of PEI is reflected in the mechanical properties. The tensile strength at yield is as high as 15,000 pounds per square inch, even up to 190 degrees, it can reach 6000 pounds per square inch, and the flexural modulus can reach 480,000 pounds per square inch. The flexural modulus is even as high as 1,700,000 pounds per square inch; in terms of mechanical properties, PEI can be regarded as the king of engineering plastics.
Injection mould process conditions:
Drying treatment: PEI has hygroscopic properties and can cause material degradation. The humidity value should be less than 0.02%. The recommended drying condition is 150°C for 4 hours.
Melting temperature: 340～400℃ for common type material; 340～415℃ for reinforced type material.
Mold temperature: 107～175℃, the recommended mould temperature is 140℃.
Injection pressure: 700～1500bar.
Injection speed: Use the highest possible injection speed.
More detail of PEI 1010 plastic resin,Any interested in, pls kindly contact with me, we will talk further and send you our professional plan for your reference.
评价
目前还没有评价