描述
PC塑料原材料挤出级产品描述规格聚碳酸酯树脂（PC）用于光存储介质，它是：-高纯度-低粘度-易释放聚碳酸酯树脂（PC）是一种优良的工程热塑性塑料，具有优良的抗冲击性、易加工性、良好的尺寸稳定性、高的稳定性、高的稳定性、高的稳定性、高的稳定性、高的稳定性、高的稳定性和高的稳定性
PC塑料原料挤出级
产品详细信息
通常由注塑成型、，最重要的加工方法是注射成型，PC层压板广泛应用于银行、大使馆、拘留中心和公共场所的飞机机柜、照明、工业安全挡板和防弹玻璃的防护窗
| 等级名称PC颗粒，PC塑料原料 | 回收的产品描述 | 产品等级注射等级 | 外观颗粒，透明颜色 | 数据表 | 项目 | 典型特征 | 测试标准 | 密度1.2g/cm3 | ASTM D-792 |
| 熔体流动速率10-15g/10分钟ASTM D-1238 | |||||||||
| 成型收缩率0.6-0.7% | ASTM D-955 | ||||||||
| 抗拉强度58MPa | ASTM D-638 | ||||||||
| 抗弯强度66MPa | ASTM D-790 | ||||||||
| 断裂伸长率100% | ASTM D-638 | ||||||||
| 弯曲模量2060MPa | ASTM D-790 | ||||||||
| Izod冲击强度 | 760MPa | ASTM D-256 | |||||||
| Izod缺口冲击强度 | ≥29KJ/mASTM D-256 | ||||||||
| 热偏转温度130℃ | ASTM D-648 |
PC Plastic Raw Material Extrusion Grade
Product Description Specifications Polycarbonate Resin (PC) is used on optical storage media, it is: – High purity – Low viscosity – Easy release Polycarbonate Resin (PC) is an excellent engineering thermoplastic, with fine impact resistance, easily processing, good dimensional stability, high…
PC Plastic Raw Material Extrusion Grade
Product Details
PC Plastic Raw Material (Polycarbonate)
PCusuallyismadeintoproductsbyinjectionmolding,extrusion,coining,blowmolding,thermoforming,printing,adhesive,coatingandmachining,themostimportantprocessingmethodisinjectionmolding
PC can be used as windows and doors, PC laminates are widely used in banks, embassies, detention centers and public places of protection windows for aircraft cabinets, lighting, industrial safety baffle and bullet-proof glass.
| ProductName KY-T412 | ||||||||
| Grade Name PC granules,PC Plastic Raw Material | ||||||||
| ProductDescription Recycled | ||||||||
| ProductGradeInjection grade | ||||||||
| Appearance Pellet,transparent color | ||||||||
| Data Sheet | ||||||||
| Item | Typical Characteristic | TestingStandard | ||||||
| Density | 1.2g/cm3 | ASTM D-792 | ||||||
| Melt Flow Rate | 10-15g/10min | ASTM D-1238 | ||||||
| Molding Shrinkage | 0.6-0.7% | ASTM D-955 | ||||||
| Tensile Strength | 58MPa | ASTM D-638 | ||||||
| Flexural Strength | 66MPa | ASTM D-790 | ||||||
| Elongation at break | 100% | ASTM D-638 | ||||||
| Flexural Modulus | 2060MPa | ASTM D-790 | ||||||
| Izod Impact Strength | 760MPa | ASTM D-256 | ||||||
| Izod Notched Impact Strength | ≥29KJ/m2 | ASTM D-256 | ||||||
| Heat Deflection Temperature | 130℃ | ASTM D-648 | ||||||
评价
目前还没有评价