描述

PA66 GF25%FR V0

产品：PA66 GF25%FR V0

颜色：黑色/天然色

类型：未经处理

等级：注塑

联系人：Tina Lin

PA66 GF25%FR V0

产品详细信息

PA66 GF25%FR V0

尼龙的优点

1。机械强度高，韧性好，抗拉和抗压强度高。比抗拉强度高于金属，比抗压强度与金属相近，但刚度小于金属。拉伸强度接近屈服强度，是ABS的两倍多。冲击强度远高于普通塑料，优于缩醛树脂

PA应用2。抗疲劳性能优异，反复弯曲后仍能保持原有的机械强度。PA经常用于扶梯扶手和新型自行车塑料轮圈，周期性疲劳效应非常明显

3。高软化点和耐热性（如尼龙46，高结晶度尼龙具有较高的热变形温度，可在150℃下长期使用。经玻璃纤维增强后，PA66的热变形温度可达到250℃以上。

4.表面光滑，摩擦系数低，耐磨性好。作为可移动机械部件使用时，具有自润滑性能，噪音低.当摩擦效果不太高时，可不使用润滑剂；如果确实需要使用润滑剂来减少摩擦或帮助散热，可以选择水、油、油脂等。因此，作为传动部件，其使用寿命较长。耐腐蚀、耐碱和大多数盐液、弱酸、机油、汽油、芳香烃化合物和一般溶剂，对芳香化合物不起作用，但不耐强酸和氧化剂。耐汽油、油脂、酒精、弱碱等腐蚀，具有良好的抗老化能力。可作为润滑油和燃料的包装材料

6。它具有自熄性、无毒、无味、耐候、不受生物侵蚀，并具有良好的抗菌性和防霉性

7。优异的电气性能。在干燥环境下，甚至在高湿度环境下，也可用作工频绝缘材料

8。该产品重量轻，易于染色，易于成型。由于其低熔体粘度，它可以快速流动。易于充模，充模后凝固点高，成型速度快，成型周期短，生产效率高

有关PA66 GF25%FR V0的更多详细信息，请立即联系

####>

PA66 GF25% FR V0

Product : PA66 GF25% FR V0
Color : Black/Natural Color
Type : Virgin
Grade : Injection molding
Contact  : Tina Lin < info@kinggor.com>

PA66 GF25% FR V0

Product Details

>

PA66 GF25% FR V0

Advantages of nylon

1. High mechanical strength, good toughness, high tensile and compressive strength. The specific tensile strength is higher than that of metal, and its specific compressive strength is similar to that of metal, but its rigidity is less than that of metal. The tensile strength is close to the yield strength, which is more than twice that of ABS. The impact strength is much higher than that of general plastics and better than that of acetal resin.

PA application 2. The fatigue resistance is outstanding, and the original mechanical strength can still be maintained after repeated bending. PA is often used in escalator handrail and new type bicycle plastic wheel rim where periodic fatigue effect is very obvious.

3. High softening point and heat resistance (such as nylon 46, high crystallinity nylon has high thermal deformation temperature and can be used for a long time at 150 ℃. After reinforced by glass fiber, the thermal deformation temperature of PA66 can reach above 250 ℃.

4. Smooth surface, low friction coefficient and wear resistance. When it is used as a movable mechanical component, it has self-lubricating property and low noise. When the friction effect is not too high, it can be used without lubricant; if it is really necessary to use lubricant to reduce friction or help heat dissipation, water, oil, grease, etc. can be selected. Thus, as a transmission component, its service life is long

5. It is resistant to corrosion, alkali and most salt liquids, weak acid, engine oil, gasoline, aromatic hydrocarbon compounds and general solvents, inert to aromatic compounds, but not resistant to strong acids and oxidants. It can resist the corrosion of gasoline, oil, fat, alcohol, weak alkali and so on, and has good anti-aging ability. It can be used as packing material of lubricating oil and fuel.

6. It is self extinguishing, non-toxic, odorless, weather resistant, inert to biological erosion, and has good antibacterial and mildew resistance.

7. Excellent electrical performance. It can be used as power frequency insulation material in dry environment, even in high humidity environment.

8. The product is light in weight, easy to dye and easy to form. Due to its low melt viscosity, it can flow rapidly. Easy to mold filling, high freezing point after mold filling, rapid shaping, so the molding cycle is short and the production efficiency is high.

Contact now for more details about PA66 GF25% FR V0.

Tina Lin< ###>