描述
注射成型用GF40%阻燃剂V0 PPS原材料的特性：
1，优异的耐热性，温度指数200-400°C，HDT>260°C
2、固有阻燃性、天然阻燃性、V0/5VA等级
3、优异的耐化学性能，200℃以下，无已知溶剂
尺寸稳定性好，成型公差小，翘曲度低，蠕变小
5、优异的机械性能、高抗拉、高强度、耐高温
GF40%阻燃剂V0 PPS注塑原材料
产品详细信息GF40%阻燃剂V0 PPS注射成型原材料。其机械强度特别高，尤其是抗弯强度非常高，具有优良的弹性恢复特性
2。它具有高韧性、压缩性能和剪切性能
3。在高温和高负荷下，它仍然具有优良的抗蠕变和抗循环应力疲劳性能
4。伸长率和冲击强度都很高，这大大改善了之前PPS树脂的脆性，这被认为是一种缺陷
5。能承受260℃电焊浴浸泡10秒，满足电子元器件表面组装工艺要求
7。在高湿度和高温下，体积电阻率变化不大，介电常数几乎不随循环次数和温度变化。作为一种电绝缘材料，它具有很好的特性
8。高熔合强度、攻丝、压制等二次加工特性都非常优越
现在，我们将放弃40%阻燃剂V
Tina Lin<####
是注塑制造商的专业gf40%阻燃v0 pps原材料之一，您可以从我们工厂以优惠价格订购优质gf40%阻燃v0 pps注塑原材料
GF40% Flame Retardant V0 PPS Raw Material For Injection Molding
Characteristics of GF40% flame retardant V0 PPS raw material For Injection molding:
1, superior heat resistance, temperature index 200-400 ° C, HDT> 260 ° C;
2, inherent flame retardancy, natural flame retardant, V0/5VA rating;
3, excellent resistance Chemical properties, below 200 ° C, no known solvent;
4, good dimensional stability, tight molding tolerances, low warpage, low creep;
5, excellent mechanical properties, high tensile, high strength, at high temperatures
GF40% Flame Retardant V0 PPS Raw Material For Injection Molding
Product Details
GF40% flame retardant V0 PPS raw material For Injection molding
1. Its mechanical strength is especially high, especially its bending strength is very high, and it has excellent elastic recovery characteristics.
2. It has high toughness, compression properties and shear properties.
3. Under high temperature and high load, it still has excellent creep resistance and fatigue resistance for cyclic stress.
4. The elongation and impact strength are high, which greatly improves the brittleness of the previous PPS resin, which is considered to be a defect.
5. It can withstand the immersion in electric welding bath at 260 ℃ for 10 seconds, which can meet the requirements of surface assembly technology of electronic components.
6. There are very few ionic impurities, which may be used in the field of demanding electrical properties.
7. At high humidity and high temperature, the volume resistivity changes little, and the dielectric constant almost does not change with the number of cycles and temperature. As an electrical insulating material, it has very good characteristics.
8. High fusion strength, tapping, pressing and other secondary processing characteristics are very superior.
Contact Now forGF40% flame retardant V0 PPS raw material For Injection molding.
Tina Lin< ###>
is one of the professional gf40% flame retardant v0 pps raw material for injection molding manufacturers, you can order high quality gf40% flame retardant v0 pps raw material for injection molding at good price from our factory.
评价
目前还没有评价