描述
用于5加仑瓶的PC塑料原料
产品说明规格聚碳酸酯树脂（PC）用于光存储介质，它是：-高纯度-低粘度-易释放聚碳酸酯树脂（PC）是一种优良的工程热塑性塑料，具有良好的抗冲击性，易于加工，良好的尺寸稳定性，高
5加仑瓶装PC塑料原料
产品详细信息
<5加仑瓶用PC塑料原材料
聚碳酸酯PC塑料原材料耐弱酸、弱碱、中性油
聚碳酸酯PC塑料原材料不耐紫外线，不耐碱
PC是一种几乎无色的玻璃状无定形聚合物，具有良好的光学性能。PC塑料原料高分子量树脂具有较高的韧性，缺口冲击强度为600~900J/m，未填充品牌的热变形温度约为130°C，玻璃纤维增强可使该值增加10°C。PC塑料原料弯曲模量高达2400MPa以上，树脂可加工成大型刚性制品。低于100°C时，负载下的蠕变率较低。PC耐水解性差，不能用于反复承受高压蒸汽的产品
PC塑料原材料
PC Plastic Raw Material For 5 Gallon Bottle
Product Description Specifications Polycarbonate Resin (PC) is used on optical storage media, it is: – High purity – Low viscosity – Easy release Polycarbonate Resin (PC) is an excellent engineering thermoplastic, with fine impact resistance, easily processing, good dimensional stability, high…
PC Plastic Raw Material For 5 Gallon Bottle
Product Details
PC Plastic Raw Material For 5 Gallon Bottle
Polycarbonate PC Plastic Raw Materialis resistant to weak acids, weak alkalis, neutral oils.
Polycarbonate PC Plastic Raw Materialis not resistant to UV light, intolerant alkali.
PC is an almost colorless glassy amorphous polymer with good optical properties. PC Plastic Raw Material high molecular weight resin has high toughness, notched Izod impact strength of 600 ~ 900J / m, Unfilled brand heat distortion temperature of about 130 ° C, glass fiber reinforced can make this value increased by 10 ° C. PC Plastic Raw Material flexural modulus of up to 2400MPa above, the resin can be processed into large rigid products. Below 100 ° C, the creep rate under load is low. Poor hydrolysis resistance of PC, can not be used to repeatedly withstand high pressure steam products.
PC Plastic Raw Material
| Item | Typical Characteristic | Testing Standard | ||||||
| Density | 1.35g/cm3 | ASTM D-792 | ||||||
| Molding Shrinkage | 0.001-0.003mm/mm | ASTM D-955 | ||||||
| Water Absorption | 0.16% | ASTM D-570 | ||||||
| Rockwell Hardness | 122 | ASTM D-785 | ||||||
| Tensile Strength | 110MPa | ASTM D-638 | ||||||
| FlexuralStrength | 131MPa | ASTM D-790 | ||||||
| Elongation at break | 5% | ASTM D-638 | ||||||
| Flexural Modulus | 5512MPa | ASTM D-790 | ||||||
| Izod Notched Impact Strength | 107J/m | ASTM D-256 | ||||||
| Heat Deflection Temperature | 148℃ | ASTM D-648 | ||||||
| Flame Retardant | V0 | |||||||
| Loss Factor | 0.0009（60Hz） | ASTM D-150 | ||||||
| Volume Resistivity | 1.0×10^17Ω.cm | ASTM D-257 | ||||||
| Dielectric Strength | 3.17(60Hz) | ASTM D-149 |
评价
目前还没有评价