描述

高冲击原塑料Pa6 Gf15黑色

PA6塑料材料

热塑性、轻质、坚韧、化学和耐用

良好的耐磨性、自润滑性和耐溶剂性

免费样品和快递

高冲击纯塑料Pa6 Gf15黑色

产品详细信息

高抗冲原塑料Pa6 Gf15黑色

注塑和挤出加工条件：
在加工Pa6和PA66时，强烈建议在干燥前进行干燥。水分含量的最大值应为0.2%。最大允许干燥温度在约80至110°C的范围内。聚酰胺6和聚酰胺66在310°C以下具有热稳定性。在高于此温度时，会导致分解，形成的初始产物主要是一氧化碳、氨和己内酰胺。当使用注射成型和挤出技术加工PA6/聚酰胺6时，推荐以下条件

注射成型

长径比18:22

熔体温度应在240-270°C（尼龙6）和270-300°C（尼龙66）之间

模具温度应在55-80°C范围内

挤出

挤出时，只有高粘度等级才能进行挤出加工

建议使用长径比为20-30的三段螺杆

挤出过程中的加工温度应为位于240至270°C（PA6）和270至290°C（PA66）

是专业的高抗冲原塑料PA6 gf15黑色制造商之一，您可以从我们工厂以优惠的价格订购高品质高抗冲原塑料PA6 gf15黑色

High Impact Virgin Plastic Pa6 Gf15 Black

.
PA6 Plastic Material
Thermoplastic, lightweight, tough, chemical and durable
Good wear resistance, self-lubricating and solvent resistance
Free Sample and express delivery

High Impact Virgin Plastic Pa6 Gf15 Black

Product Details

High Impact Virgin Plastic Pa6 Gf15 Black

Injection Molding and Extrusion Processing Conditions:
While processing PA6 and PA66 drying before is highly recommended. The moisture content should be a maximum of 0.2%. The maximum permissible drying temperatures lie in the range of about 80 to 110°C. Polyamide 6 and Polyamide 66 is thermally stable up to 310°C. At temperatures above this lead to decomposition, the initial products formed being mainly carbon monoxide and ammonia, and caprolactam. While processing PA6/ Polyamide 6 with an injection molding and extrusion techniques, the following conditions are recommended.

Injection Molding

L/D ratio of 18:22

The melt temperature should be between 240-270°C (PA6) & 270-300°C (PA 66)

The mold temperature should be in the range of 55-80°C

Extrusion

Only highly viscous grades can be processed by extrusion

A three-sections screw with a L/D ratio of 20-30 is recommended

The processing temperature during extrusion should lie between 240 and 270°C (PA6) & 270 to 290°C (PA 66)

is one of the professional high impact virgin plastic pa6 gf15 black manufacturers, you can order high quality high impact virgin plastic pa6 gf15 black at good price from our factory.