描述

聚苯硫醚PPS塑料GF40聚合物

聚苯硫醚PPS塑料GF40聚合物特性：

1，优异的耐热性，温度指数200-400°C，HDT>260°C

2、固有阻燃性、天然阻燃性、V0/5VA等级

3、优异的耐化学性能，200℃以下，无已知溶剂

尺寸稳定性好，成型公差小，翘曲度低，蠕变小

5、优异的机械性能、高抗拉、高强度、耐高温

聚苯硫醚塑料GF40聚合物

产品详细信息

聚苯硫醚塑料GF40聚合物

聚苯硫醚材料的名称是聚苯硫醚

此外，它还具有较小的成型收缩率（约0.08%）。吸水率低（约0.02%）

具有良好的耐火性、良好的振动疲劳性等优点

聚苯硫醚材料密度：1.36g/cm3

成型温度：300-330°C

聚苯硫醚塑料GF40聚合物材料性能

聚苯硫醚材料的耐热性：热变形温度超过260°C，是目前温度最高的热塑性工程塑料之一，长期使用温度在220~240°C，短时间可达260°C。

请立即联系我们，了解聚苯硫醚塑料GF40聚合物

Phenylene Sufide PPS Plastic GF40 Polymer

Phenylene Sufide PPS Plastic GF40 Polymer Feater:
1, superior heat resistance, temperature index 200-400 ° C, HDT> 260 ° C;
2, inherent flame retardancy, natural flame retardant, V0/5VA rating;
3, excellent resistance Chemical properties, below 200 ° C, no known solvent;
4, good dimensional stability, tight molding tolerances, low warpage, low creep;
5, excellent mechanical properties, high tensile, high strength, at high temperatures

Phenylene Sufide PPS Plastic GF40 Polymer

Product Details

Phenylene Sufide PPS Plastic GF40 Polymer

The name of PPS material is Phenylene sufide.

Phenylene Sufide PPS Plastic GF40 Polymer has hard and brittle, high crystallinity, refractory thermal stability

Good, high mechanical strength, excellent electrical properties and other advantages.

PPS is one of the best varieties of heat resistance in engineering plastics, thermal deformation temperature – generally greater than 260

Degree, chemical resistance is second only to polytetrafluoroethylene, fluidity is second only to nylon.

In addition, it also has a small molding shrinkage (about 0.08%). Low water absorption (about 0.02%).

Good fire resistance, good vibration fatigue and other advantages.

PPS material densite : 1.36g /cm3

Molding temperature: 300-330°C

Phenylene Sufide PPS Plastic GF40 Polymer material properties

Heat resistance of PPS material: the thermal deformation temperature exceeds 260°C, which is one of the thermoplastic engineering plastics with the highest temperature at present, and the long-term use temperature is

220~240°C, short time up to 260°C.

Chemical resistance of PPS material: no solvent that can dissolve PPS below 200°C has been found so far. It is highly resistant to inorganic acids, bases and salts.

Electrical properties of PPS material: in the environment of high temperature, high humidity and high frequency, it has high volume resistivity, surface resistivity, striking voltage and low

Dielectric constant and dielectric loss Angle tangent, is an excellent insulating material. The modified material can also be made into high strength material with good electrical conductivity.

Mechanical properties of PPS material: strong rigidity, high surface hardness, and has excellent creep resistance and fatigue resistance.

Contact Now for Phenylene Sufide PPS Plastic GF40 Polymer.

Tina Lin< ###>

is one of the professional phenylene sufide pps plastic gf40 polymer manufacturers, you can order high quality phenylene sufide pps plastic gf40 polymer at good price from our factory.