描述

碳纤维增强Pc Cf20 Gf35%可回收塑料颗粒

产品说明规格聚碳酸酯树脂（Pc）用于光存储介质，它是：-高纯度-低粘度-易释放聚碳酸酯树脂（Pc）是一种优良的工程热塑性塑料，具有良好的抗冲击性，易于加工，良好的尺寸稳定性，高

碳纤维增强Pc Cf20 Gf35 35%再生塑料颗粒

产品详细信息

常见工程塑料：PC、ABS、PP、PA6、PA66、POM、PET、PBT

特殊高聚物：PPA、PPS、PEI、PEEK

改性复合塑料：PMMA/ABS、PC/ABS、PC/ABS、PC/PBT、PC/PET、PBT/PET、PBT/TPE等，TPEE等符合UL、SGS、RoHS（ISO9001）标准。

性能：复合聚碳酸酯PC塑料颗粒具有高透明度、高冲击性、高强度、高抗蠕变性、优异的尺寸稳定性、良好的低温耐热性、阻燃性

项目试验条件[状态]典型性能测试标准项目测试条件典型特征测试标准密度=“边框右宽度：1px；边框右颜色：黑色；边框左：无”colspan=“3”>ASTM D-792熔流速率

300℃/1.2kg1

6g/10min=“193”colspan=“3”>模压收缩率

3.0mm=“右边框宽度：1px；右边框颜色：黑色；左边框：无”colspan=“3”>0.24%ASTM D-570抗拉强度
屈服点断点

突破点

突破点

3“>3”6.4mm2355MPaASTM D-790缺口冲击强度23°C830J/m本次1<<<<ASTME-831

Carbon Fiber Reinforced Pc Cf20 Gf35 35% Recycled Plastic Pellets

Product Description Specifications Polycarbonate Resin (PC) is used on optical storage media, it is: – High purity – Low viscosity – Easy release Polycarbonate Resin (PC) is an excellent engineering thermoplastic, with fine impact resistance, easily processing, good dimensional stability, high…

Carbon Fiber Reinforced Pc Cf20 Gf35 35% Recycled Plastic Pellets

Product Details

Products list:

Common engineering plastics: PC, ABS, PP, PA6, PA66, POM, PET, PBT

Special high polymer: PPA, PPS, PEI, PEEK

Modified compound plastics: PMMA/ABS, PC/ABS, PC/PBT, PC/PET, PBT/PET, PBT/ABS ETC

Thermoplastics: TPE, TPU, TPEE ETC

With UL, SGS, RoHS grades ( ISO9001)

Property: Compound Polycarbonate PC Plastic Granule with high transparency, high impact, high strength, high creep resistance, excellent dimensional stability, good resistance to low-temperature and heat, flame retardant.

PC has been widely used in building decoration industry, transportation industry, the advertising industry, agriculture and electronic & electrical appliances and other fields.

项目			试验条件[状态]			典型性能			测试标准
Item			Test conditions			Typical Characteristic			TestingStandard
Density						1.2g/cm3			ASTM D-792
MeltFlow Rate			300°C/1.2kg			16g/10min			ASTM D-1238
MoldingShrinkage			3.0mm			0.5-0.7%			ASTM D-955
Water Absorption						0.24%			ASTM D-570
Tensile Strength Yield Point Break Point			3.2mm			64Mpa			ASTM D-638
Tensilerate			Break point			123%			ASTM D-638
FlexuralStrength			6.4mm			95MPa			ASTM D-790
FlexuralModulus			6.4mm			2355MPa			ASTM D-790
Notchedimpact strength			23°C			830J/m			ASTM D-256
HeatDeflection Temperature			0.45MPa			138℃			ASTM D-648
VicatSoftening Point						157℃			ASTM D-1525
CLTE						6.8×10 1/°C			ASTM E-831