描述

用于注射零件的低价格再研磨PEI颗粒

PEI/PEEK颗粒

优异的机械性能、电气绝缘性能、耐辐射性、耐高温性和耐磨性，并通过微波

用于注射零件的低价格再研磨PEI颗粒

产品细节

用于注射零件的低价再研磨PEI颗粒

PEI注射成型工艺条件

干燥处理：PEI具有吸湿性，可导致材料降解。湿度值要求小于0.02%。建议在150摄氏度的条件下干燥，并干燥4小时

熔融温度：正常类型的材料为340至400摄氏度，增强型材料为340至415摄氏度。

模具温度：107至175摄氏度，建议模具温度为140摄氏度。注射压力：700至1500巴。注射速度：使用可能的最高注射速度。机器选择：PEI树脂可以在大多数标准注塑机上注射。建议使用往复式螺杆注塑机

是一家专业的低价格注射用pei再研磨颗粒制造商，您可以从我们工厂以优惠的价格订购高质量、低价格的注射用pei再研磨颗粒

Low Price Regrind PEI Pellets For Injection Parts

PEI/PEEK Pellets
Excellent mechanical properties, electrical insulation properties, radiation resistance, high temperature resistance and wear resistance, and through the microwave.

Low Price Regrind PEI Pellets For Injection Parts

Product Details

Low price regrind PEI Pellets for Injection Parts

PEI Injection molding process conditions

Drying treatment:PEI has moisture absorption properties and can cause material degradation. Humidity values are required to be less than 0.02%. It is recommended to dry the conditions of 150 degrees C and dry for 4 hours.

Melting temperature:the normal type of material is 340 to 400 degrees C, and the reinforced type material is 340 to 415 degrees C.

Mold temperature:107 to 175 degrees C, the recommended mold temperature of 140 degrees C. Injection pressure:700 to 1500 bar. Injection speed: Use the highest possible injection speed. Machine selection:PEI resins can be injected on most standard injection moulding machines. A reciprocating screw injection molding machine is recommended.

is one of the professional low price regrind pei pellets for injection parts manufacturers, you can order high quality low price regrind pei pellets for injection parts at good price from our factory.