描述

挤出杆用抗静电天然尼龙PA66材料

一,。增强PA66材料

2。用于注射成型

3。机械强度高

4。免费样品

挤压杆用抗静电天然尼龙PA66材料

产品详细信息

挤压棒用抗静电天然尼龙66材料

抗静电尼龙66材料的优点：
1。高抗拉强度
非常好。韧性和抗冲击性
3。自流、耐磨、抗药性
4。低温特性好
5。自熄
工艺条件干燥处理：
如果材料在加工前密封，则无需干燥。但是，如果储存容器打开，建议在85℃的热空气中干燥。如果湿度大于0.2105℃，还需要12小时的真空干燥
熔化温度：
260~290℃。玻璃添加剂的产品温度为275~280℃。熔化温度应避免超过300℃
模具温度：
80℃。模具温度会影响结晶度，结晶度会影响产品的物理性能。对于薄壁塑料件，如果使用低于40℃的模具温度，塑料件的结晶度将随时间变化。为了保持塑料零件的几何稳定性，需要进行退火处理
注射压力：
通常为750~1250巴，具体取决于材料和产品设计

是挤出杆生产商的专业防静电天然尼龙pa66材料之一，您可以从我厂以优惠的价格订购高质量的防静电天然尼龙pa66挤出杆材料

Anti Static Natural Nylon PA66 Material For Extrusion Rod

.
1. Reinforced PA66 Material
2. Used for Injection Molding
3. High mechanical strength
4. FREE SAMPLE

Anti Static Natural Nylon PA66 Material For Extrusion Rod

Product Details

Anti static natural nylonPA66 Material for extrusionrod

Advantages of antistatic PA66 materials:
1. high tensile strength;
Excellent 2. toughness and impact resistance;
3. self-run, wear resistance, drug resistance;
4. low temperature characteristic is good;
5. self-extinguishing;
Process conditions drying treatment:
If the material is sealed before processing, there is no need to dry. However, if the storage container is opened, it is recommended to dry in 85℃ of hot air. If the humidity is greater than 0.2,105℃ and 12 hours of vacuum drying are also required.
Melting temperature:
260~290℃. The product for glass additives is 275~280℃. melting temperature should be avoided above 300℃.
Mold temperature:
80℃. the mold temperature will affect the crystallinity, which will affect the physical properties of the product. For thin-walled plastic parts, if the mold temperature below 40℃ is used, the crystallinity of plastic parts will change with time. In order to maintain the geometric stability of plastic parts, annealing treatment is needed.
Injection pressure:
usually at 750~1250 bar, depending on material and product design.

is one of the professional anti static natural nylon pa66 material for extrusion rod manufacturers, you can order high quality anti static natural nylon pa66 material for extrusion rod at good price from our factory.