描述

尼龙6耐磨颗粒

PA6塑料材料

热塑性、轻质、坚韧、化学和耐用

良好的耐磨性、自润滑性和耐溶剂性

免费样品和快递

尼龙6耐磨颗粒

产品详细信息

pa6耐磨颗粒

pa6的具体特性

<1.15 g/cm3密度（未填充pa6 1.14）

机械性能：高杨氏模量（约4.6 GPa，未填充pa6约2.9 GPa）。在高温（高于Tg）和吸湿后，杨氏模量显著大于未填充的PA6。在断裂时，应变相当温和（约4%，类似于玻璃填充的PA6）

Tg=60°C，Tm=220°C（对于PA6和纳米复合材料，这些值是相同的）。HDT温度为150°C（未填充的PA6温度约为70°C）

是专业的pa6耐磨颗粒制造商之一，您可以从我们工厂以优惠的价格订购高品质的pa6耐磨颗粒

Pa6 Abrasion Resistance Pellets

.
PA6 Plastic Material
Thermoplastic, lightweight, tough, chemical and durable
Good wear resistance, self-lubricating and solvent resistance
Free Sample and express delivery

Pa6 Abrasion Resistance Pellets

Product Details

pa6 abrasion resistancepellets

Specific characteristics of PA6

1.15 g/cm3 density (unfilled PA6 1.14)

Mechanical properties: High Young’s Modulus (about 4.6 GPa, unfilled PA6 approximately 2.9 GPa). Young’s Modulus stays significantly greater than unfilled PA6 at high temperatures (above Tg) and after moisture absorption. At the break, the strain is quite modest (ca. 4 percent , similar to glass filled PA6).

Tg = 60 °C, Tm = 220 °C (for PA6 and nanocomposite, these values are the same). HDT is at 150 °C (unfilled PA6 is around 70 °C).

is one of the professional pa6 abrasion resistance pellets manufacturers, you can order high quality pa6 abrasion resistance pellets at good price from our factory.