描述
光扩散聚碳酸酯颗粒原料聚碳酸酯比重：1.18-1.20g/cm3模塑收缩率：0.5-0.7%模塑温度：230-320C模塑条件：110-120C模塑温度下8小时：-60-120C
光扩散PC颗粒原料
产品细节
性能：高冲击强度、形状稳定、无色透明、易染色、电绝缘、耐腐蚀、耐磨性好。但自润滑性差，易发生应力开裂，高温易水解，与其他树脂相容性差。PC适用于制造仪器小型零件、绝缘透明零件和耐冲击零件
| 项目 | 试验条件 | 典型特性测试标准 | 密度 | 1.2g/cm3 | ASTM D-792 | |
| < | ASTM D-1238 | |||||
| 模压收缩率3.0mm | 0.5-0.7% | ASTM D-955 | ||||
| 吸水率 | 0.24% | ASTM D-570 | ||||
| 抗拉强度 屈服点断点 | 3.2mm | 64Mpa | ASTM D-638 | |||
| 拉伸速率 | 断点 | 123% | ASTM D-638 | |||
| 抗弯强度 | 6.4mm | 95MPa | ASTM D-790 | |||
| 弯曲模量 | 6.4mm | 2355MPa | ASTM D-790 | |||
| <缺口冲击强度23摄氏度830J/m | ASTM D-256 | |||||
| 热偏转温度 | 0.45MPa | 138℃ | ASTM D-648 | |||
| <维卡软化点 | 157℃ | ASTM D-1525 | ||||
| CLTE | 6.8×10 1/°C | ASTM E-831 |
Light Diffusion PC Granules Raw Materials
PC- PolycarbonateSpecific gravity: 1.18-1.20g/cm3Moulding shrinkage: 0.5-0.7%Moulding temperature: 230-320CDrying condition: 8 hours under 110-120CUsage temperature: -60~120C
Light Diffusion PC Granules Raw Materials
Product Details
Properties: High impact strength, shape stable, colourless, transparent, easy dying, electric insulation, corrosion resistance, wear resistance are good. However, poor self-lubricating, with tendency to stress cracking, high temperature easily hydrolyzed, poor compatibility with other resins. PC is suitable for making instrument small parts, insulating and transparent parts and impact-resistant parts.
PC usually is made into products by injection molding, extrusion, coining, blow molding, thermoforming, printing, adhesive, coating and machining, the most important processing method is injection molding.
| Item | Test conditions | Typical Characteristic | Testing Standard | ||||||||
| Density | 1.2g/cm3 | ASTM D-792 | |||||||||
| Melt Flow Rate | 300°C/1.2kg | 16g/10min | ASTM D-1238 | ||||||||
| MoldingShrinkage | 3.0mm | 0.5-0.7% | ASTM D-955 | ||||||||
| Water Absorption | 0.24% | ASTM D-570 | |||||||||
| Tensile Strength Yield Point Break Point | 3.2mm | 64Mpa | ASTM D-638 | ||||||||
| Tensile rate | Break point | 123% | ASTM D-638 | ||||||||
| Flexural Strength | 6.4mm | 95MPa | ASTM D-790 | ||||||||
| Flexural Modulus | 6.4mm | 2355MPa | ASTM D-790 | ||||||||
| Notched impact strength | 23°C | 830J/m | ASTM D-256 | ||||||||
| Heat Deflection Temperature | 0.45MPa | 138℃ | ASTM D-648 | ||||||||
| Vicat Softening Point | 157℃ | ASTM D-1525 | |||||||||
| CLTE | 6.8×10 1/°C | ASTM E-831 |
评价
目前还没有评价