描述

玻璃纤维PBT GF30 V0

产品：玻璃纤维PBT GF30 V0

颜色：黑色/天然/白色

工艺：注射/挤出成型

玻璃纤维PBT GF30 V0

产品详细信息玻璃纤维PBT GF30 V0

产品特点：

热稳定性、高强度、增强级、耐化学性、标准级、耐高温

玻璃纤维PBT GF30 V0应用领域：

家用电器元件、医疗级、电子电气元件、填充级、，一般等级的聚对苯二甲酸丁二醇酯，也称为聚对苯二甲酸丁二醇酯（PBT），属于聚酯系列。它是一种乳白色、半透明到不透明的结晶热塑性聚酯树脂，由1.4-PBT丁二醇（PBT）和PTA或DMT缩聚而成。与PET一起被称为热塑性聚酯，或饱和聚酯

加工技术：PBT结晶速度快，最适合注塑加工，其他方法有挤出、吹塑、涂布和各种二次加工

材料加工参考：

（1）干燥：材料在高温下容易水解，因此加工前干燥很重要。建议在空气中干燥条件为120℃、6~8小时或150℃、2~4小时。湿度必须小于0.03%。如果使用吸湿干燥器，建议条件为150℃，2.5小时

（3）注射压力：中等（高达1500bar）

（4）输液速度：输液速度应尽可能快（因为PBT固化很快）

有关玻璃纤维PBT GF30 V0的更多详细信息，请立即联系

林婷娜

Glass Fiber PBT GF30 V0

Product : Glass fiber PBT GF30 V0

Color: Black/Natural/White Color
Porcess : Injection/Extrusion Molding

Glass Fiber PBT GF30 V0

Product Details

Glass fiber PBT GF30 V0

Product Features:

Thermal stability, high strength, enhanced grade, chemical resistance, standard grade, high temperature resistance

Glass fiber PBT GF30 V0 Application Field:

Home appliance components, medical grade, electronic and electrical components, filling grade, general grade

Glass fiber PBT GF30 V0

Polybutylene terephthalate, also known as Polybutylene Terephthalate (PBT), belongs to polyester series. It is an opalescent translucent to opaque, crystallized thermoplastic polyester resin manufactured by 1.4-PBT Butylene glycol (PBT) and polycondensation of PTA or DMT. Together with PET, it is called thermoplastic polyester, or saturated polyester.

Processing technology: PBT crystallization speed, the most suitable processing method for injection, other methods are extrusion, blow molding, coating and a variety of secondary processing.

Material processing reference:

(1) Drying: The material hydrolyzes easily at high temperatures, so drying before processing is important. The recommended drying conditions in the air are 120℃, 6~8 hours, or 150℃, 2~4 hours. Humidity must be less than 0.03%. If using hygroscopic dryer, the recommended condition is 150℃, 2.5 hours;

(2) Mold temperature: 40~60℃ for unenhanced materials. Mold cooling channels should be well designed to reduce bending. Heat must be dissipated quickly and evenly. It is suggested that the diameter of mold cooling cavity should be 12mm;

(3) Injection pressure: medium (up to 1500bar);

(4) Infusion speed: The infusion speed should be as fast as possible (because PBT solidifies quickly);

(5) Runner and gate: Circular runner is recommended to increase pressure transmission.

Contact now for more details about Glass fiber PBT GF30 V0.

Tina Lin< ###>