描述
增强塑料原材料含40%纤维PPS树脂颗粒的PPS价格
高流动性PPS树脂（PPS颗粒）：耐高温的PPS颗粒高刚性的PPS颗粒尺寸稳定性好的PPS颗粒火焰处理等；PPS颗粒的耐腐蚀性；PPS颗粒的抗辐射能力
增强塑料原材料PPS，含40%纤维PPS树脂颗粒价格
产品详细信息
应用范围
（1）汽车工业：聚苯硫醚占汽车工业的45%，主要用于汽车功能、点火、加热器、恒温器、灯座、轴承；如能代替金属制作排气缸循环阀和泵叶轮、气动信号调节器等
| 项目 | 典型特征 | 测试标准 | 玻璃纤维含量30% | 40% | 50% | — | ||
| ASTM D-792 | 成型收缩率 | 0.30% | 0.25% | 0.20% | ASTM D-955 | |||
吸水率 | 0.06% | ASTM D-570 | 抗拉强度130MPa | ASTM D-638 | ||||
| 180MPa | ASTM D-790 | |||||||
| ASTM D-638 | 夏比缺口冲击 | 8KJ/m2 | 8KJ/m2 | 10KJ/m2 | ASTM D-6110 | |||
| 255℃ | ASTM D-648 | 阻燃剂 | V0 | |||||
| 介电常数3.8 | 介电强度 | 20kV/m | ASTM D-149 |
Reinforced Plastic Raw Materia PPS With 40% Fiber PPS Resin Granules Price
high liquidity PPS resin(PPS granules) :PPS granules in high temperature resistancePPS granules in high rigidityPPS granules in good dimensional stabilityPPS granules in flame reatardancy etc;PPS granules in corrosion resistance;PPS granules in radiation resistance;
Reinforced Plastic Raw Materia PPS With 40% Fiber PPS Resin Granules Price
Product Details
Range of application
(1) automobile industry: PPS is used to make up about 45% of the automobile industry, mainly for automobile function, ignition, heater, thermostat, lamp holder, bearing;If can replace metal production exhaust cylinder circulation valve and pump impeller, pneumatic signal mediators and so on.
(2) mechanical industry: it is used for shell, structural parts, wear-resisting parts and sealing materials. It has pump body, valve, bearing, bearing bracket, piston ring and gear.
(3) textile fiber: for special industrial dust removal equipment.
(4) thin film/insulation paper: used for electrical insulation materials.
| Item | Typical Characteristic | Testing Standard | |||||
| Glass Fiber content | 30% | 40% | 50% | — | |||
| Density | 1.56g/cm3 | 1.65g/cm3 | 1.70g/cm3 | ASTM D-792 | |||
| Molding Shrinkage | 0.30% | 0.25% | 0.20% | ASTM D-955 | |||
Water Absorption | 0.06% | 0.06% | 0.05% | ASTM D-570 | |||
| Tensile Strength | 130MPa | 145MPa | 150MPa | ASTM D-638 | |||
Flexural Strength | 180MPa | 200MPa | 210MPa | ASTM D-790 | |||
| Elongation at break | 1% | 1% | 1% | ASTM D-638 | |||
Charpy Notched Impact | 8KJ/m2 | 8KJ/m2 | 10KJ/m2 | ASTM D-6110 | |||
Heat Deflection Temperature | 255℃ | 260℃ | 260℃ | ASTM D-648 | |||
Flame Retardant | V0 | V0 | V0 | ||||
| Permittivity | 3.8 | 3.8 | 3.5 | ASTM D-150 | |||
Dielectric Strength | 20kV/m | 20kV/mm | kV/mm | ASTM D-149 | |||
评价
目前还没有评价